Чистый Звук

Specifications

• Hardware
• Microphone Inputs: (2) Female XLR Pin 2 Hot
• Input Impedance: 664 Ohms balanced
• Phantom Power: +48 Volt
• EIN: -118 dB @ 51 dB gain (150 Ohm source impedance) -120 dB A-weighted
• Maximum Input Level: -2 dBu (150 Ohm source impedance)
• Frequency Response: +0, -0.2 dB 20 Hz - 20 kHz, ref. 1 kHz
• THD+N: <,.005%, 20 Hz - 20 kHz
• Insert Inputs: (2) 1/4”, TRS balanced or unbalanced
• Send Level (ring): +19 dBu maximum
• Maximum Return Level (tip): +19 dBu maximum
• Line Inputs: (4) 1/4”, TRS balanced or unbalanced
• Input Impedance: 20 kOhm unbalanced, 10 kOhm unbalanced
• Maximum Input Level: +19 dBu (40 Ohm source impedance)
• Frequency Response: +0, -0.2 dB 20 Hz - 20 kHz, ref. 1kHz
• THD+N: <,.012% A/D, 20 Hz - 20 kHz, <,.012% A/D/A, 20 Hz - 20 kHz
• Instrument Input: (1) 1/4”, mono jack
• Input Impedance: 1 MOhm unbalanced
• Maximum Input Level: +19 dBu
• Frequency Response: +0, -0.25 dB 20 Hz - 20 kHz, ref. 1 kHz
• THD+N: <,.0125% A/D
• Crosstalk: <,-74 dB any input or output to any recording channel, 20 Hz-20 kHz <,-95 dB at 1 kHz typical
• Line Outputs: (2) 1/4”, TRS balanced or unbalanced
• Level: +19 dBu maximum
• Impedance: 110 Ohms
• Headphone Output: (1) 1/4”, stereo jack 100 mW per channel at 50 Ohms
• MIDI Interface: 5 pin DIN connectors for MIDI in and MIDI out
• Digital Audio Input: Coaxial RCA (S/PDIF format)
• Digital Audio Output: Coaxial RCA (S/PDIF format) always transmits the audio data from the USB stream
• D/A and A/D Conversion Sample Rate: 44.1 kHz or 48 kHz (determined by computer application)
• Dynamic Range:
  • A/D >,101 dB typical, unweighted, 20 Hz - 20 kHz >,104 dB typical, A-weighted, 20 Hz - 20 kHz
  • D/A >,107 db typical, unweighted, 20 Hz - 20 kHz >,109 db typical, A-weighted, 20 Hz - 20 kHz
  • A/D/A >,100 dB dB typical, unweighted, 20 Hz - 20 kHz >,103 dB typical, A-weighted, 20 Hz - 20 kHz
• Analog Path: >,115 dB dB typical, unweighted, 20 Hz - 20 kHz >,118 dB typical, A-weighted, 20 Hz - 20 kHz
• USB Type B Socket: Version 1.1, Version 1.1 hubs are not supported
• Power Requirements: PS0913-B adapter supplied
• Dimensions: 4.625”,W x 7.25”,H x 7.75”, D (118mm x 184mm x 197mm)
• Weight: 2.65 lbs
• • 35 factory presets, plus a powerful editor for creating additional presets
  • 6 Reverb types including: Hall, Chamber, Plate, Room, Ambience and Custom
  • Sixteen user adjustable parameters for fine tuning the reverb
  • Advanced yet easy-to-use interface
  • Floating point DSP processing
  • Mono and Stereo Operation
  • 16 and 24 bit compatible
  • Efficient CPU Utilization
  • Sample Rates up to 96kHz
• System Requirements

  • Windows

    • Pentium III 500 MHz (1.2 GHz recommended)
    • Windows 2000 or Windows XP
    • Cubase LE software supplied is only compatible with Windows XP not Windows 2000
    • 128 MB RAM (512 MB recommended)
    • 100 MB of available hard disk space
    • EIDE/Ultra DMA 7200RPM hard disk type or better
    • Available USB port (1.1 or higher)
  • Mac
    • Power PC, G4 Processor (450 MHz or faster)
    • Mac OS X version 10.2.8 or later
    • Cubase LE software supplied is only compatible with Mac OS X version 10.2.8 or later
    • 128 MB RAM minimum (512MB recommended)
    • 20 MB available hard disk space
    • 18 ms hard drive (average speed time) or faster
    • QuickTime™, 3.0 or later
    • Available USB port (1.1 or higher)
Lexicon Pantheon Reverb Plug-In